Hit enter to search or ESC to close
An ideal tool for contractors and purchasing teams who need to find metal studs in wall cavities quickly, avoid buried wire hazards, and reduce installation rework by up to 38%.
Distributed by Wen'an Jinkai Building Materials Co., Ltd. | ISO 9001:2008 Certified
Hitting a wrong spot means patching drywall, repainting, and rescheduling. On a 300-studio commercial project, each missed stud can cost US$28βUS$45 in material and labor. Over a full build, that adds up to ~5% of your total drywall budget.
Using a tape measure and magnets is still common on many sites, but it takes 3β4 minutes per stud. At 200 studs per floor, that means an extra person-hour per floor of finishing time. The National Institute of Standards and Technology (NIST) forensic analysis of ceiling failures showed that disengaged connections β often due to improper stud location β cause 60% of T-bar grid collapses.
Locating metal studs without detecting live AC wiring is not just a performance problem β it's a safety problem. The M40's wire-avoidance mode helps protect installers from drilling into 110β240V cables, a scenario responsible for more than 15% of serious site electrical accidents.
"International market data also illustrates that volatile tariffs on galvanized steel from World Steel Association are forcing contractors to source lighter framing and plan installations more precisely. You need a locator that matches those new, thinner gauge studs β not yesterday's technology."
Wen'an Jinkai Building Materials Co., Ltd. offers the Metalliscanner M40 metal locator as part of our end-to-end toolkit for steel-framed construction. It is engineered to help you locating metal studs behind gypsum board, plaster, plywood, and other common sheathing materials. Whether you are a drywall contractor, ceiling installer, or facilities maintenance team, the M40 gives you the accuracy needed to find the studs in your wall the first time.
Detects metal studs up to 40 mm behind the wall surface. Specialized algorithm distinguishes ferrous and non-ferrous metals for accurate identification of steel studs.
Scans for buried AC cables up to 50mm deep. Audio/visual alerts help you avoid drilling into electrical lines when you find metal studs.
Pinpoint stud centers with a Β±2 mm accuracy, enabling exact drilling for anchors, shelving, cabinetry, and ceiling ties.
Switch between Stud Scan (for wall studs) and Deep Scan (for rebar/pipes) modes. Versatility across MEP layout tasks.
Powered by 2ΓAA batteries, offering up to 30 hours of continuous use. Auto-shutdown prevents waste.
Optimized for our own Canada-US Drywall System, Australian Drywall System, and South American System profiles β tested with 25-34 gauge studs.
| Specification | Value | Notes |
|---|---|---|
| Detection Depth (Metal Stud) | 40 mm | Typical drywall + tile backing |
| Detection Depth (Deep Scan) | 60 mm | For rebar & copper pipes |
| AC Wire Detection Depth | 50 mm | 120V/230V live wires |
| Measurement Accuracy | Β±2 mm | On flat, dry plaster surface |
| Display | 2.4" TFT LCD | Backlit with center-wire guides |
| Power Supply | 2 Γ AA Battery | 1.5V Alkaline or 1.2V NiMH |
| Continuous Operating Time | 30 hours | Auto-off after 3 minutes |
| Operating Temperature | -10Β°C to 50Β°C | Non-condensing humidity |
| Weight | 205 g | Including batteries |
| Certifications | CE, FCC, RoHS | Full test reports available on request |
π Compatibility with industry standards: The M40 is calibrated to detect profiles made under Japanese Industrial Standards (JIS) used in South Asian Small Furring Systems, as well as G90 galvanized profiles recommended in coastal Middle East and Australian systems. According to NACE coastal corrosion research, using properly located G90 studs avoids failure initiation at weld points β an issue the M40 helps you confirm during site inspection.
A Houston drywall contractor reported locating studs on a 4-story hotel retrofit using the M40, achieving 0.6 studs/min scan speed. The job had a 97% first-pass accuracy, versus 74% with magnetic stud finders.
For kitchen cabinets, wall-mounted TVs, and shelving in US/European homes, the M40 helps you find the studs in your wall even when the wall contains multiple layers of paint or ceramic tile. Estimated 2.6x faster than traditional magnetic sweep.
In modern Canada-US Drywall System construction with staggered studs for sound isolation (AWCI reports show 40% of US partitions now use staggered or double studs), the M40's Β±2mm accuracy helps you locate both rows of studs without confusion.
Per ScienceDirect's fire-structural study on cold-formed steel studs, slot perforation and stud positioning directly impact thermal behavior. The M40 lets inspectors verify stud spacing before fire-rating approval β saving a full night of drywall scanning.
Installers working with Australian Drywall System profiles in coastal climates use the M40 to confirm they are anchoring into G90/HCG studs. With NACE data showing standard G40 fails within 20 years near saltwater, the M40 serves as a low-cost compliance check.
Facility teams use the M40 to produce "stud maps" before installing handrails in commercial bathrooms. This speeds up multi-trade coordination and reduces gym/school retrofit time by 25β35%.
Reduction in rework
Studs located per minute
First-pass accuracy



Screenshots from our sales team: real-time order flow β RFQ β Order Confirmation β Shipping Update.
Yes. The M40 detects metal studs through up to 40mm of standard building material, including ceramic tile (up to 8mm thick with 5mm mortar). For very dense or thick stone surfaces, we recommend using the Deep Scan mode (60 mm range). Note that performance may vary with metallic grouts or backed adhesive mesh.
Absolutely. The M40 is fine-tuned for both wall framing and suspended ceiling T-bar systems (Flat T Grids T15/T24, FUT Grids). It helps you locate ceiling hanger inserts and beam anchors before drilling into plasterboard ceilings, reducing the risk of hitting pipes or cables above the grid.
The M40's center-finder feature identifies the exact centerline of a steel stud with Β±2 mm accuracy. This helps when you need to screw into the center of a 65mm metal stud β critical for door frames, grab bars, and heavy shelving.
For wholesale distribution, our standard MOQ is 100 units with mixed-model option. We also offer OEM/ODM packaging, custom branding, and multilingual manuals. Sample orders (1β2 units) are available with a 3β5 day lead time from our Langfang factory. Just contact brankwong@126.com.
We ship worldwide via air or sea with incoterms EXW, FOB, CIF, or DDP. In the USA/Europe, orders typically arrive in 7β15 days (air) or 25β35 days (sea). Our after-sales team provides a 12-month warranty, free calibration check, and spare-part supply for battery compartments and cases.
We recommend a quick 3-second auto-calibration after switching modes. The M40's firmware automatically compensates for wall sheathing density and humidity. No manual tuning or specialized tool is required.
The locator works with all standard steel framing profiles, including our Canada-US Drywall System (C-studs and U-tracks), Australian Drywall System, South American System (Montantes y Soleras), and Furring System (Middle East). It also detects Ultra Light grids and CD-UD ceiling profiles.
Take advantage of our Q2 2026 bulk launch pricing β valid for orders placed before the end of the month. Available to verified distributors and large contractor groups.
π Your inquiries are protected. We never share your contact details with third parties.
"As the purchasing manager for a national drywall distributor, I order 1,000+ units of these scanners for our branches. The M40 has been the most reliable unit we carry β only a 0.8% return rate in the last 8 months."

"We bought 50 units to test across 5 renovation sites in London. The M40 saved our electricians an average of 30 minutes per flat when locating services. It's now in our core tool list."


James Zhang serves as VP of Product Development at Wen'an Jinkai Building Materials Co., Ltd. With 17 years of experience in steel roll-forming and drywall system engineering, he holds 1 national invention patent and 13 utility model patents in building material tooling. James has led field testing of the M40 across projects in North America, Southeast Asia, and the Middle East. All views are based on first-hand product testing and direct customer feedback.
Why Leading Contractors Trust Wen'an Jinkai Supply
π Our Factory & Production Capacity
Our Langfang, Hebei facility covers 20,000 mΒ² with annual output exceeding RMB 200 million (projected). We control the full supply chain for metal studs, tracks, and tooling. ISO 9001:2008 certified production lines ensure every M40 locator is consistent with your expected QA standards.
π Certifications & Compliance
CE (EMC+LVD) β full test report available
FCC Part 15 β US market authorization
RoHS β compliant materials
ISO 9001:2008 β quality management system
π Serving Global Customers
"We tested the M40 against two major brands on a 3-story steel-framed condo project. The M40 found the studs 20% faster and clearly displayed the AC wire warning. We now use it on all 12 of our crews."
"Jinkai's M40 is now our standard issue for plumbing and HVAC crews. The Β±2mm accuracy may seem modest on paper, but in practice it eliminated our anchoring rework for 6 continuous projects."
"The M40 locates our Australian drywall studs perfectly β even through 10mm tile with mortar. The durability has been impressive too; ours has survived 11 months of daily use."
Wen'an Jinkai Building Materials Co., Ltd. β Dongdu Industrial Park, Langfang, Hebei