Hit enter to search or ESC to close
Cut drywall partitioning costs by up to 22% while eliminating loose-joint callbacks and corrosion risk. Our adjustable metal studs are engineered for the North American and European construction markets — delivered with full traceability, G40/G60/G90 zinc coatings, and a lead time as short as 15 days.
In 2026, the global drywall steel supply chain is under unprecedented stress. Tariffs, freight volatility, and inconsistent raw-material quality are turning "budget-friendly" purchases into long-term liabilities. Here's what procurement managers and contractors face:
A Worldsteel trade report documents how tariff disputes on galvanized coil in North America push manufacturers to seek sources in Brazil or India — often sacrificing coating quality and dimensional consistency. The result? Unpredictable drywall studs price swings and mid-project substitutions.
A NIST forensic study found that most metal framing failures don't stem from steel tensile failure — but from disengagement of cross-tee connections. A slight twist during installation can cut load capacity by 50%. Without precision roll-forming, your walls are only as strong as the weakest tab.
The NACE study is clear: standard G40 galvanization is insufficient within 5 km of the ocean. Weld points — where the coating burns off — become rust initiation sites. If your project is near the coast, you need G90 or better, or face a 20-year structural failure.
An AWCI market analysis reveals that acoustic isolation demands are driving deeper U-tracks and resilient channels. Cheap studs without precise corrugation patterns cause direct wall coupling, dropping STC ratings by up to 10 points — a costly hotel or multifamily failure.
Non-integrated manufacturers often miss delivery windows, causing project idle time and liquidated damages. For a drywall sub, one late shipment can erase profit across three jobs. That's why we maintain a 30-day finished goods buffer on popular sizes.
Our 1-5/8 adjustable unimast metal studs for drywall are manufactured on precision roll-forming lines that hold tolerances of ±0.1mm. Each profile is engineered to exceed ASTM C645 and EN 14195 standards, delivering three critical outcomes: snap-fit stability, predictable load performance, and long-term corrosion resistance.
As highlighted in the JIS standards review, adopting JIS tolerances in roll-forming creates better snap-fit connections and significantly reduces loose joints. We apply these tolerance philosophies across our Canada-US Drywall System and Australian Drywall System profiles.
Available in G40, G60, and G90 hot-dipped zinc coatings. For coastal projects, the NACE corrosion study recommends G90 — we stock it as standard for export orders to the Middle East and Australia.
Our adjustable metal studs feature a telescoping design that allows field adjustment between 18"–24" without cutting or special tools. This is ideal for uneven floor-to-ceiling heights, reducing labor time by up to 30%.
| Parameter | Value | Testing Standard |
|---|---|---|
| Profile Type | Unimast (Adjustable) Stud | ASTM C645 |
| Web Size | 1-5/8" (41.3 mm) — also available: 2-1/2", 3-5/8", 4" | EN 14195 |
| Flange Height | 1-1/4" (31.8 mm) standard; custom 1"–2" | ASTM C955 |
| Steel Thickness | 0.5 mm (25 ga) to 1.2 mm (18 ga) | ASTM A653 |
| Material | Cold-rolled galvanized steel (DX51D+Z, SGCC) | JIS G3302 |
| Zinc Coating | G40 (Z120) / G60 (Z180) / G90 (Z275) | ASTM A653 |
| Length | 8' (2.44 m), 10' (3.05 m), 12' (3.66 m); custom up to 20' | EN 10162 |
| Expansion Range | Adjustable: 18"–24", 24"–30", 30"–36" | Factory Tested |
| Fire Rating | Up to 4 hours (with 2 layers of Type X board) | ASTM E119 |
| Load Capacity | Axial: 2.1 kN @ 600mm centers (25ga) | AS/NZS 4600 |
🔬 All values are from independent third-party lab reports. Full test certificates available on request.
Our customers use 1-5/8 adjustable unimast metal studs across these demanding environments:
Acoustically decoupled partitions with STC ratings of 55+
4-hour fire-rated corridors and X-ray shielded rooms
G90-coated, mold-resistant framing for clean rooms
G90/G210 coating to withstand salt-spray exposure
Challenge: The contractor needed 1-5/8 interior partitions resistant to 50°C summer heat and 90% humidity.
Solution: We supplied 0.8mm G90-coated adjustable metal studs with pre-punched service holes.
Result: 38% faster installation due to the telescoping adjustability — no on-site cutting waste. The project received a "Tolerance Excellence Award" from the main contractor.
Challenge: Seismic retrofits of heritage buildings required lightweight, high-strength studs that could flex without cracking.
Solution: Our Australian Drywall System profiles with optimized web perforations reduced thermal conductivity by 15% (per ScienceDirect fire study).
Result: Passed all cyclic load tests with 0 joint failures across 2,400m² of partition.
🤝 Want a custom case study for your project profile? Talk to our engineers →
When comparing 1-5/8 metal stud price quotes from different suppliers, it's critical to evaluate the total landed cost — not just the FOB price per piece. Tariff volatility documented by Worldsteel means that a low FOB quote can quickly be negated by duties or freight surcharges.
Procurement, customization, logistics, and after-sales — answered by our technical team.
A: Standard C-stud profiles have a fixed height. Our adjustable (unimast) studs use an inner nested profile that telescopes to bridge gaps — ideal for retrofit work, uneven floors, or bulkhead transitions. You gain ±20% height adjustability without cutting or shimming, plus the inherent stiffness of a nested column.
A: Standard MOQ is 5,000 pcs for stock sizes (8', 10', or 12' lengths). For custom profiles, the MOQ is 8,000 pcs or one 20ft container, whichever is greater. We can also accommodate LCL (less-than-container) shipments with a 2,000 pcs minimum, subject to packing feasibility.
A: Absolutely. Our acoustic metal studs feature staggered web slots that decouple the two flanges, improving STC ratings by up to 8 points when tested in standard partition assemblies. We can also adjust slot widths and spacing to meet thermal break requirements, citing the 15% conductivity reduction found in the ScienceDirect fire study.
A: We provide a free digital stud finder guide (PDF + video) that covers magnetic and EDGE-R detection methods for our G90-coated, ferrous studs. It includes troubleshooting tips for double-layer board and metal-lath assemblies. Download it when you request a quote — it's also bundled inside every shipment as a QR-coded link.
A: Standard terms are 30% T/T deposit, 70% balance against the Bill of Lading copy. For established buyers or orders over $50k, we accept L/C at sight. We also support Western Union, PayPal for sample orders (up to $500), and for US/EU clients we can offer net-30 after credit review.
A: For cost-sensitive bulk orders, sea freight via Tianjin or Qingdao to Long Beach or Los Angeles takes 20–25 days. For time-critical jobs, we offer air freight (7–10 days) and rail-freight options to interior US destinations. We also manage full documentation (commercial invoice, packing list, COO, and any required certifications) to simplify customs clearance.
"We've been importing their 1-5/8 metal studs for our Orlando hotel projects since 2023. The G90 coating has held up perfectly through two hurricane seasons. The adjustable nested design cut our framing labor by 30% — the crew doesn't need to cut studs for every bulkhead."

"I was initially skeptical about buying drywall steel from China. But their SGS inspection reports and ISO 9001 documentation were spotless. The drywall studs price was 18% below my previous Brazilian supplier, and the quality consistency across 3 containers has been excellent."

"The acoustic metal studs with perforated webs hit our target STC of 58 for the apartment complex. Their engineers even helped us adjust the slot pattern at no extra cost. Fast response, reliable delivery — we're now planning a 2026 framework agreement."

We currently have 5 production slots open for Q1 2026. Order before Feb 28 to lock in current steel pricing and receive free priority production — a value worth $2,500.
Wen'an Jinkai operates 4 high-speed roll-forming lines with a combined annual output of 60,000 tons. Every production batch is tracked with full material traceability from coil to crate.
✅ Compliance & Certifications
🤝 Trusted by Global Buyers
💬 Real Client Conversations