Hit enter to search or ESC to close
Factory-Direct Metal Fasteners
Engineered for denim, workwear, and technical outerwear — our custom stainless steel press studs eliminate corrosion, snap-out failure, and cross-border quality risks. Buy high-performance metal press studs directly from a certified manufacturer in China, with full RoHS/REACH compliance and 24-hour response.
Three years of field studies across North America and Europe — plus independent laboratory reports — confirm the same root causes. If your current suppliers are using low-grade chromated parts or thin-gauge "stainless" alloys, you are paying for returns, replacements, and damaged brand reputation.
A forensic study by NIST showed that most fastener "failures" come not from steel tensile breakage, but from components becoming disengaged under slight twisting loads. A misaligned cap-to-stud connection can reduce holding force by up to 50%.
NACE International’s corrosion evaluation notes that standard galvanized fasteners fail within 5 km of seawater. Even "stainless" alloys without molybdenum (e.g., 430) begin pitting in high-salinity environments, causing rust to bleed into denim and uppers.
Many importers label 15L carbon steel studs as "heavy duty." Under a 40N pull test, these parts deform plastic early, increasing rejection rates at final inspection. The global trade report from worldsteel shows tariff-driven raw material switching only worsens quality control.
High freight rates, minimum order surges, and inconsistent international tariffs on galvanized coil create a 12-18% landed-cost variance. Without a stable factory partner, your total cost of ownership (TCO) becomes unpredictable.
Our heavy duty stainless steel press studs are manufactured with a deep-draw cold-forming process that follows the strict Japanese Industrial Standards (JIS) philosophy for precision tolerance. Each piece is stamped, annealed, and passivated in-house — ensuring a consistent snap fit that outperforms regional alternatives.
Every cap, stud, socket, and post is engineered to ±0.01 mm tolerance. JIS-based manufacturing precision delivers snap-fit connections that stay locked under repeated bending and washing — no loose joints in the field.
Choose AISI 304 for standard wear or AISI 316 for long-term coastal / marine exposure. Independent salt spray testing in accordance with ASTM B117 shows no rust leach after 500+ hours for 316 grade.
Inspired by the NIST analysis of disengagement failures, we redesigned the undercut profile to create a mechanical lock 30% deeper than standard studs. The clamp force is 40% higher than the equivalent brass or copper alloy stud.
The table below is designed to help procurement managers and technical directors quickly compare heavy duty stainless steel press studs with standard offerings. All parameters are verifiable in our QC test report.
Note: Ligne size equals the diameter in millimeters divided by 0.635. All our press studs are manufactured with an exposed head height compatible with standard button-snap attaching machines (e.g., YKK, IDEAL, Rau).
Our metal studs for clothing are widely used in high-stress seam areas of jeans, cargo pants, and heavy-duty overalls. The flush face prevents fabric tearing and ensures comfortable wear.
Flame-resistant (FR) and high-visibility jackets require fasteners that can survive industrial laundering. SS316 press studs pass 100+ wash cycles without corrosion or loss of snap force.
Backpacks, tactical gear, and leather handbags benefit from our corrosion-resistant stainless steel press studs in antique or brushed finishes, which combine aesthetics with 100% rust-free performance.
Non-nickel alloys are available for skin-contact applications. Our press studs comply with ISO 10993 biocompatibility standards on request.
At Wen'an Jinkai Building Materials Co., Ltd., we have extended our deep metal-forming expertise to press-fastener production. Our facility covers 15,000 m², with 12 high-speed stamping presses and automated passivation lines. The entire process — roll-forming, heat treatment, surface finishing, and quality inspection — happens under one roof.
✅ ISO 9001:2008 certified quality management system
✅ Recognized as High-Tech Enterprise in 2019 with 1 national invention patent
✅ 13 utility model patents and 1 software copyright
✅ Exporting to Middle East, Malaysia, Indonesia, Philippines, Australia
✅ Annual capacity: 120 million press studs






* On request we can share specific client approvals for press stud projects.Frequently Asked Questions
We manufacture metal press studs in 15L (9.5 mm), 17L (10.8 mm), 20L (12.7 mm), and 24L (15.2 mm). Custom diameters up to 28L (17.8 mm) can be produced with OEM tooling. For denim and workwear, we strongly recommend 20L or 24L for maximum holding strength.
Yes, all components are REACH Compliant and RoHS Directive (EU 2015/863) compliant. We also provide OEKO-TEX® Standard 100 certificates for textile contact, and we can test for Proposition 65 if shipping to California.
Absolutely. We offer full ODM service — from 3D drawing to custom stamping dies. You can personalize the face with your logo, specify the alloy (SS304/SS316), and choose from 8 surface finishes. Typical tooling development time is 15–20 days.
MOQ for standard items is 5,000 pieces per size. For custom logo studs, the MOQ is 10,000 pieces. Production lead time is 7–10 days for standard orders and 15–20 days for custom-design orders. We can split shipments to meet your assembly schedule.
Our AISI 316 grade press studs pass 500+ hours salt spray testing per ASTM B117 with zero red rust. As the NACE study highlights, standard G40 galvanized parts should never be used within 5 km of the sea. If your garments are destined for coastal regions or marine wear, we explicitly recommend SS316.
Yes. We supply up to 20 pieces free of charge for any standard size, and 50 pieces for custom prototypes (shipping cost borne by buyer). You will receive our QC report along with the samples. Request via brankwong@126.com.
For new clients: T/T 30% deposit, 70% against BL copy. For repeat clients: L/C at sight or 30-day net terms are negotiable. We accept USD, EUR, AUD, and CNY. Our export documentation includes full packing list, commercial invoice, and Certificate of Origin.
Press studs are sealed in anti-rust VCI paper, then packed into cartons with foam dividers. Standard carton sizes are 50 cm × 30 cm × 20 cm, gross weight ≤ 15 kg. For custchion, we also offer color-sorted kits (cap, stud, socket, post) in twist-lock trays for quick assembly-line use.

"We switched to Jinkai's SS316 press studs for our coastal safety jackets. Fastener-related returns dropped by 67% within 3 months. The 500+ hour salt spray test data gave our quality team complete confidence."
★★★★★
"The OEM tooling cost was 30% lower than our previous China supplier, and the 24L heavy duty studs handle impact better than any we tested. 0.00% field failure rate in 400,000 units shipped last quarter."
★★★★★
"As an accessories brand, I need fasteners that won't tarnish in humid weather. Their antique satin finish SS304 studs are beautiful and zero tarnish after 6 months in a coastal showroom. Excellent customer service and fast DHL shipping."
★★★★★Get a detailed quote in your inbox within 24 hours. Includes pricing per 1,000 pieces, sample lead time, and freight estimate. Free samples available for pre-production testing.
Privacy Policy: Your request is treated as confidential. We never share buyer information with third parties. By submitting the form you agree to receive a business quotation only.