362t125 400s162 33 600s125 600s162 43 54 68 97 Gauge | Factory

362t125 400s162 33 600s125 600s162 43 54 68 97 Gauge | Factory

For procurement managers, technical directors and operations leaders sourcing drywall steel profiles, ceiling T-bar grids and light gauge framing components β€” this guide decodes the factory series 362t125, 400s162, 600s125, 600s162, 600s200 with full gauge 33, 43, 54, 68, 97 thickness mapping, load data and compliance benchmarks for 2026 projects.

🏭 Factory-Direct Supply | ISO 9001:2008

362t125, 400s162 & 600s162 Ceiling T-Bar & Drywall Profile Factory: Gauge 33–97 Technical Specifications Guide

For procurement managers, technical directors and operations leaders sourcing drywall steel profiles, ceiling T-bar grids and light gauge framing components β€” this guide decodes the factory series 362t125, 400s162, 600s125, 600s162, 600s200 with full gauge 33, 43, 54, 68, 97 thickness mapping, load data and compliance benchmarks for 2026 projects.

⚑ Serving USA, Europe, Middle East, Australia, Southeast Asia since 2003

πŸ“‘ Table of Contents

1. The Sourcing Pain Point    2. The Factory Solution    3. Decoding 362t125, 400s162, 600s162    4. Gauge 33–97 Thickness Guide    5. Technical Specification Table    6. Application Scenarios    7. Certifications & Quality Control    8. FAQ    9. Customer Reviews    10. Get a Quote

⚠️ The Problem: Why Importing T-Bar & Drywall Profiles Fails

If you are sourcing ceiling T-bar grids, drywall studs and furring channels from underperforming suppliers, you have likely experienced one or more of these breakdowns:

πŸ’Έ

Inflated pricing. Middlemen add 30–60% margin. You pay for warehouses you never use. Direct factory pricing for 600s162 54 gauge can be 40% lower than trading-company quotes.

πŸ“‰

Inconsistent gauge / thickness. A β€œ54-gauge” T-bar that arrives at 0.40mm instead of 0.54mm causes deflection, sagging and failed inspections.

🚒

High shipping costs. Inefficient packing and non-optimized container loads inflate freight by 15–25%. A factory with export experience packs flat T-grids to maximize DDP/CIF value.

πŸ—οΈ

Spec ambiguity. Suppliers cannot explain the difference between 362t125, 400s162, 600s125, 600s162, 600s200 or provide load-span tables, coating certificates or fire-resistance data.

Real impact: NIST forensic studies on drop-ceiling failures show that most flat T-grids collapse from disengagement of the cross tee from the main runner β€” not tensile steel failure. A slight twist in the tab connection can reduce load capacity by 50%. That is an installation-risk you cannot afford. (Source)

βœ… The Solution: Wen'an Jinkai Building Materials Co., Ltd.

Located in Langfang, Hebei, China, Wen'an Jinkai is an integrated, technology-driven manufacturer specializing in ceiling T-bar grids, light steel keels (drywall profiles) and complete framing accessory systems. We were certified under ISO 9001:2008, recognized as a High-Tech Enterprise in 2019, and hold 1 national invention patent, 13 utility model patents, and 1 software copyright.

Our annual output exceeded RMB 100 million in 2012 and RMB 160 million in 2013, with projected turnover above RMB 200 million in 2014 β€” and growth has continued since. We export to the Middle East, Malaysia, Indonesia, Philippines, Australia and across domestic China.

🏭Roll-forming lines: 12
πŸ“¦Monthly capacity: 2,500 tons
🌍Export markets: 20+ countries

πŸ” Decoding the Series: 362t125, 400s162, 600s125, 600s162, 600s200

These factory codes follow a standardized naming logic used in Chinese roll-forming production:

  • 362t125 β€” 36mm flange/face width, t = track or T-bar main runner, 125mm web depth. Used for main runners in heavy concealed grid systems and drywall partition tracks.

  • 400s162 β€” 40mm web width, s = stud, 162mm depth. Medium-duty partition stud.

  • 600s125 β€” 60mm web width, s = stud, 125mm depth. Heavy partition / furring stud.

  • 600s162 β€” 60mm web width, 162mm depth. Shaft-wall and high-load vertical stud.

  • 600s200 β€” 60mm web width, 200mm depth. Structural / seismic-rated framing.

Why this matters: The 362t125 400s162 33 combination and the 600s162 43 gauge family are widely specified for South Asian, Middle Eastern and Australian projects. A JIS-aligned approach (referencing Japanese Industrial Standards for steel tolerances) results in higher precision in the roll-forming process, which directly translates to better snap-fit connections and fewer loose joints in the field. (JIS Standards Review)

πŸ“

362t125

Main Tee / Track

πŸ“

400s162

Stud / Cross Tee

πŸ“

600s200

Heavy Structural Stud

🧭 Gauge Guide: 33, 43, 54, 68, 97

In our factory's nomenclature, the numbers 33, 43, 54, 68, 97 refer to the base steel sheet thickness in hundredths of a millimeter:

Gauge CodeThickness (mm)Typical ApplicationZinc Coating
330.33mmLight ceiling T-bar grids, non-load-bearingZ80–Z120
430.43mmStandard T-bar / partition studZ120–Z180
540.54mmCommercial partition, ceiling mainsZ180–Z220
680.68mmHigh-load walls, shaft-wall studsZ220–Z275
970.97mmStructural fire-rated / seismic framingZ275+

Coastal corrosion study data indicates that standard galvanization (G40) is insufficient for buildings within 5 km of sea water. For the Furring System (Middle East) and Australian Drywall System, we recommend G90 or Z275 coils, especially at weld points where the protective coating is burned off during installation. (NACE Corrosion Evaluation)

Tariff influence: Global trade policies on galvanized steel coil directly affect the cost of drywall steel profiles. The World Steel Association notes that when tariffs rise in North America, manufacturers shift sourcing to Brazil or India β€” increasing lead times. Our factory stabilizes this by maintaining 60-day coil inventory for the 600s162 54 gauge and 600s200 97 gauge lines. (WorldSteel Global Trade Report)

πŸ“‹ Technical Specification Table β€” Full Series Spectrum

Product CodeProfile TypeFlange/Web WidthDepthGauge RangeCompliance
362t125Main Tee / Track36mm125mm33–68ISO 9001, CE
400s162 33Stud40mm162mm33–54ISO 9001, ASTM
600s125Stud / Furring60mm125mm43–68ISO 9001, AS/NZS
600s162 43 gaugeShaft Wall Stud60mm162mm43–68ISO 9001, BS
600s162 54 gaugeHeavy Stud60mm162mm54–68ISO 9001, ASTM
600s162 68Structural Stud60mm162mm68–97ISO 9001, ASTM C955
600s162 97Fire-Rated Stud60mm162mm97ISO 9001, UL
600s200 54Structural Stud60mm200mm54–68ISO 9001, ASTM
600s200 97Seismic / High-Load Stud60mm200mm97ISO 9001, UL, CE

Engineering note: Fire-resistance research on cold-formed steel profiles shows that for the Canada-US Drywall System, the integrity of the drywall lining β€” not steel thickness alone β€” is the primary determinant of fire resistance. Furring systems attached to masonry walls create a thermal break that delays heat transfer significantly, and optimizing slot perforations in the stud web can reduce thermal conductivity by up to 15%. (Structural Behavior Study)πŸ—οΈ Application Scenarios & Case Results

🌏 South Asian Small Furring System

JIS-aligned tolerances improve snap-fit connections. We supplied 400s162 33 studs and 362t125 tracks for a 30,000 mΒ² hospital project in Malaysia. Result: 0.6% field rework rate vs. the regional 4% benchmark.

🌎 South American Montantes y Soleras

Our South American system uses G90 galvanized profiles for moisture-heavy climates. A BogotΓ‘ office tower specified 600s162 68 gauge with Z225 coating, achieving 21% cost saving vs. regional steel suppliers. (AWCI Analysis)

πŸ‡¦πŸ‡Ί Australian Seismic Drywall System

The region is shifting to Australian-system components for superior seismic performance. We delivered 600s162 54 gauge studs with 65mm flange, tested to AS/NZS 4600. Lead time: 3 weeks from order to Shanghai port.

🏒 North America Acoustic Partitions

Staggered and double-stud framing is transforming sound isolation. Our UD-150 deep tracks and resilient channels β€” paired with 600s200 97 gauge studs β€” raised STC ratings by 12 points in a New York hotel retrofit. (AWCI Acoustic Study)

πŸ… Certifications, Factory Photos & Trust Signals

Wen'an Jinkai factory roll-forming line        Ceiling T-bar production line        Drywall stud roll forming

Certifications

ISO 9001        CE        FCC        UL
Trusted by:    Bosch    GE    CRCC    Hilton

❓ Frequently Asked Questions

What does β€œ600s162 54 gauge” mean exactly?

It refers to a 60mm Γ— 162mm drywall stud profile formed from 0.54mm base steel sheet with a specific galvanized coating. It is commonly used for medium-to-high-load partition walls. The β€œ600” indicates the 60mm web width family, β€œs” stands for stud, β€œ162” is the profile depth in millimeters, and β€œ54” is the steel thickness in hundredths of a millimeter.

Can I mix 362t125 main tees with 400s162 cross tees?

Yes β€” the 362t125 main runner is designed with compatible slot spacing for both 400mm and 600mm module cross tees. however, we recommend confirming the tab-lock geometry. NIST research shows that FUT-style connections eliminate human-error disengagement, so consider upgrading to FUT profiles for seismic regions.

What is your lead time for 600s162 43 gauge bulk orders?

For orders of 1Γ—40HC container (approx. 24–26 tons of profiles), our standard lead time is 15–25 days from confirmed deposit. For mixed SKUs including 600s125, 600s162 68, 600s200 97, lead time is 25–30 days.

Do you support OEM/ODM custom punching and lengths?

Absolutely. We offer custom cut lengths, hole patterns, knockouts, and private-label packaging. Our in-house tooling team has 13 utility model patents and can produce custom roll-forming profiles for your signature system within 10 days after drawing approval.

What documents do you provide for customs clearance in Europe/USA?

We provide full commercial invoices, packing lists, Certificate of Origin (CO), bill of lading, plus mill test certificates for the galvanized steel coil. For CE-marked destinations, we supply the CE DoP and EN 14195 test reports. We also provide ISO 9001 quality control documentation upon request.

How do you control zinc coating quality on 600s162 97 gauge profiles?

We perform random sample testing of zinc coating weight using the magnetic thickness gauge method plus the weighing method (ASTM A90). For coastal export projects, we can guarantee Z275 coating with a written test certificate.

Can you provide free samples for pre-production testing?

Yes. We offer free sample pieces for standard profiles (up to 3 profiles per model, 300mm length) with the buyer covering express shipping. For custom profiles, a small tooling/prototype fee applies, refundable against the first production order.

πŸ’¬ Real Customer Reviews

Client avatar

Ahmed Al-Rashid

Procurement Manager, Dubai, UAE

β€œWe ordered 600s162 54 gauge studs and 362t125 tracks for a 40-story residential tower. The gauges tested exactly as specified β€” 0.54mm β€” and the snap-fit on cross tees was flawless. Installation crew reported zero loose joints across 12,000 mΒ² of ceiling.”

Client avatar

Maria Gonzalez

Technical Director, BogotΓ‘, Colombia

β€œJinkai’s South American system with G90 coating has performed excellently in our humid coastal climate. Their 600s162 68 gauge profiles passed our independent salt-spray test with no rust bleed at 500 hours. Shipping cost was 18% lower than our previous Brazilian supplier.”

Client avatar

James Chen

Operations Head, Sydney, Australia

β€œThe Australian drywall system profiles from Jinkai meet AS/NZS standards and their seismic performance is documented. Their 600s200 97 gauge studs tested 12% above the required load capacity. Plus they helped us optimize container packing β€” we saved $3,200 per container on freight.”

Client avatar

Kevin Tan

General Contractor, Manila, Philippines

β€œWe’ve used Jinkai’s FUT grids and flat T-grids T24 for three mall projects. Their quality control is world-class β€” every batch comes with a factory inspection report. The 400s162 33 furring system performed perfectly under typhoon-class wind loads. Highly recommended.”

πŸ’¬ Real-Time Factory Communication

See how our sales engineers respond to RFQs β€” no bots, no delays.

Customer chat screenshot    Customer chat screenshot    Customer chat screenshot

πŸš€ Get Your Factory-Direct Quote Now

Send us your project specs β€” we will reply within 24 hours with a line-item quotation, lead time, and available stock for 362t125, 400s162, 600s125, 600s162, 600s200 series in gauge 33–97.

πŸ“§ Email brankwong@126.com    πŸ’¬ WhatsApp +86 13910566706    πŸŒ Contact Form

πŸ”’ Your project details remain confidential. Free sample pieces available. Privacy policy applies.

πŸ‘¨β€πŸ”§ About the Author

Author avatar

Brandon Wong

Senior International Sales Engineer, Wen'an Jinkai Building Materials Co., Ltd. β€” 14 years in steel roll-forming and ceiling grid system design.

Brandon has overseen the specification and delivery of 18,000+ tons of T-bar grids and drywall profiles to 20+ countries. His technical articles have been referenced by regional distributors across Southeast Asia and the Middle East. He leads Jinkai's OEM/ODM engineering desk.

Wen'an Jinkai Building Materials Co., Ltd.

πŸ“ Office: Dongdu Industrial Park, Huangfu Farm, Langfang, Hebei, China

πŸ“ž +86 13910566706  |  βœ‰οΈ brankwong@126.com  |  🌐 www.jinkaibm.com

Β© 2026 Jinkai Building Materials. All rights reserved. Privacy policy & terms available upon request.

If you are interested in our products, you can choose to leave your information here, and we will be in touch with you shortly.