Hit enter to search or ESC to close
ποΈ COLD-FORMED STEEL ENGINEERING
Are you burning budget on over-priced structural steel or suffering from delayed shipments? Our light gauge roof framing is engineered to meet ASTM A653, AISI S100 and AS/NZS 4600 standards, delivered factory-direct with 40β50% cost savings compared to Western mills. Built for industrial, commercial and coastal construction projects across the USA, Europe, and Australia.

Wen'an Jinkai β Roll-forming workshop
Every day you wait or overpay, your project margin shrinks. Here are the 5 most common supply-chain traps we hear from procurement managers in 2026:
Domestic mills in North America & Europe charge significant premiums for light gauge steel joists. A UK roofing contractor recently reported paying Β£2.85/kg for G90 C-joists β we export the same spec for Β£1.45/kg FOB.
According to the World Steel Association (worldsteel.org), tariff disputes on galvanized steel coil directly distort framing costs. Sourcing from one country only = price shock every 6 months.
NIST forensic analysis (nist.gov) of ceiling/roof failures shows most collapses occur from tab or cross-joint disengagement β not steel failure. Slight torsion at the connection reduces load capacity by up to 50%.
NACE research (nace.org) proves that G40-grade galvanizing fails within 5 years in high-salinity coastal environments. Weld points burn away their protective layer β rust starts precisely there.
A peer-reviewed study on cold-formed steel fire behavior (sciencedirect.com) shows drywall lining integrity, not steel thickness, determines fire resistance. Too-thin profiles buckle in a thermal gradient.
Light gauge metal joists are cold-formed from high-strength structural steel (G450βG550), offering a superior strength-to-weight ratio compared to traditional timber or hot-rolled steel beams. When used in light gauge joist framing, these sections are 60β70% lighter than hot-rolled equivalents, reducing foundation loads and lowering transportation costs.
Reduces crane time and foundation load. Shipping volume per container optimized.
Z275 (G90) coating per ASTM A653. Corrosion test data proves 20+ years in coastal air.
High-precision roll-forming lines ensure consistent snap-fit connections every time.
Cut out the importer. Our FOB/CIF pricing is 35β45% below US/EU distributor levels.
π§ What makes our light gauge roof framing different?
Box-beam option: Two C-sections joined to form a light gauge steel box beam that doubles the moment capacity for long spans up to 12m.
Multi-standard compliance: Our sections are tested to AISI S100-16, AS/NZS 4600, and EU EN 14182 β so engineers can approve instantly.
Custom hole punching & notching: We pre-punch service holes, sway brace holes, and cable slots during roll-forming. No site cutting. Saves 2β3 days per roof.
Nested packing design: We optimize section nesting to cut freight volume by 22% β a massive advantage when shipping from China to North America.
| Parameter | Specification | Testing Standard |
|---|---|---|
| Base steel grade | G450 / G500 / G550 (yield strength 450β550 MPa) | ASTM A653 / AISI S100 |
| Zinc coating mass | G60 (180 g/mΒ²) / G90 (275 g/mΒ²) / G140 (420 g/mΒ²) | ASTM A653 / JIS G3302 |
| Coating type | Hot-dip galvanized (min spangle) | ASTM A653 / EN 10346 |
| Section thickness | 0.5 mm β 2.5 mm (varies by profile) | βΒ±0.05 mm at 10% sampling |
| Section depth | 75 mm / 100 mm / 150 mm / 200 mm / 250 mm / 300 mm / 350 mm / 400 mm | AISI S100-16 |
| Flange width | 40 mm β 90 mm (custom up to 150 mm) | EN 14182 tolerances |
| Surface treatment | Passivation / oiled / dry β for export protection | MIL-DTL-81706 |
| Joist Depth (mm) | Thickness (mm) | Spacing 300mm | Spacing 400mm | Spacing 600mm |
|---|---|---|---|---|
| 150 | 1.0 | 4.2 m | 3.8 m | 3.1 m |
| 200 | 1.2 | 5.6 m | 5.1 m | 4.4 m |
| 250 | 1.5 | 7.2 m | 6.6 m | 5.7 m |
| 300 (Box Beam) | 1.6 (double) | 9.4 m | 8.8 m | 7.6 m |
| 400 (Box Beam) | 2.0 (double) | 12.0 m | 11.2 m | 10.5 m |
* Data derived from internal load tests + verified by Tianjin Structural Engineering Lab. For wind/seismic loading, request our calculation sheet.
| Coating | Zinc mass (g/mΒ²) | Expected lifespan (5km coastal) | Best use case |
|---|---|---|---|
| G40 | 40 | 3β5 years | Interior dry areas |
| G60 | 60 | 6β8 years | Sheltered exterior |
| G90 | 90 | 20+ years | Coastal/industrial roof framing |
| G140 | 140 | 25+ years | Marine splash zone |
Design note: For light gauge roof framing within 5 km of the sea, NACE recommends G90 minimum. We always include a zinc coating weight test certificate with every shipment.

High-frequency roll-forming line for C-joists
Wen'an Jinkai Building Materials Co., Ltd. is a technology-driven enterprise with 1 national invention patent, 13 utility model patents, and ISO 9001:2008 certification. We have supplied light gauge metal joists and steel framing components to 20+ export markets since 2012.
Annual output capacity: 3,000+ tonnes of cold-formed sections
Roll-forming speed: up to 40 m/min
Dimension verification: every 20th piece checked with laser micrometer
Coating weight test: magnetic gauge per coil, certified in batch report

Certificates available for download upon request.
Β±0.2 mm profile width
Β±1 mm length per 6m
Tensile strength
Salt-spray exposure
Coating thickness
Bundles max 3 tons
Waterproof wrapping
Steel strapping Γ4
Client: Melbourne steel fabricator
Product: 200mm C-joists, 1.2mm G550, G90
Key result: 37% cost reduction vs local supplier. Delivered in 4 weeks.
"The QA documentation matched our engineer's stamp requirements exactly."
Client: Dubai roofing contractor
Product: 150mm box-beam sections, 1.6mm G550, G140
Key result: Passed corrosion resistance test that failed with Indian supplier.
"No rust flash after 6 months of open storage."
Client: Ontario contracting group
Product: 300mm box-beam light gauge steel beams (AS/NZS 4600)
Key result: 2-week early delivery; passed both AISI & local code review.
"They pre-punched all service holes β saved us 3 days on site."
Industry perspective: The AWCIβs comparative study (awci.org) points out that light gauge joist framing excels in seismic and wind-load regions because of predictable cold-formed steel behavior β unlike timber, which varies with moisture content. A JIS-standard review (jisc.go.jp) also highlights that precision roll-forming improves joint fit and avoids loose connections, reducing on-site labor cost.
We supply light gauge steel joists and drywall profiles to general contractors, structural engineers, and building material distributors across North America, the Middle East, and Southeast Asia.

Representative logo wall. Full NDA-ready client list available on request.
For any building within 8 km of the sea, we recommend G550 yield strength with G90 (Z275) zinc coating as minimum. For splash zone or very high humidity, use G140. This is consistent with NACE coastal corrosion guidelines (nace.org).
Standard: 3β4 weeks after deposit. We operate 3 high-speed roll-forming lines and can expedite urgent orders to 2 weeks for standard C-joist profiles. Your logistics agent can pick up directly from our factory in Hebei.
Yes. Our roll-forming lines are equipped for custom hole punching, slotting, and notching based on your shop drawings. You can provide a DXF or CAD file, and weβll fabricate sections with pre-punched service openings, exactly to your layout.
Our engineers design a custom nesting plan for every container. For C-joists, you can typically fit 2,300β2,800 linear meters per 40ft container, depending on section depth. Weβll calculate the exact volume and weight breakdown before you pay freight β no surprises.
Our sections are roll-formed from ASTM A653 steel coils and designed in accordance with AISI S100-16 (North America), AS/NZS 4600 (Australia/New Zealand), and EN 14182 (Europe). We also provide load test certificates from a third-party Chinese lab.
For first orders, standard terms are 30% T/T deposit and 70% balance against copy of B/L. MOQ is 10 tonnes for standard profiles, or 5 tonnes for samples. We support (LC, D/P for established clients from EU/North America.)
Absolutely. As an OEM/ODM manufacturer, our engineers can design custom roll-form dies for your exclusive section profile. Minimum tooling cost starts at $3,800 (one-time die set). Once tooled, we maintain your profiles for repeat orders with your name branded on the bundle tags.

βWe compared quotes from 4 suppliers. Jinkai offered the best price-quality ratio. The G90 coating test report was spot on, and delivery was 2 weeks earlier than our local distributor.β

βTheir light gauge steel box beam sections passed our salt-spray test with no rust after 500 hours. The zinc coating was uniform even at the cut edges.β

βWe used their light gauge joist framing for a 8,000 mΒ² warehouse. Roll-forming tolerance was excellent; all sections connected perfectly without force-fit.β

βThe paperwork was flawless: Mill test cert, ASTM compliance, coating weight test, and bill of lading all matched. Our customs broker cleared the shipment in one day.β

Daniel K. Wang β Senior Structural Engineer & Export Technical Manager at Wen'an Jinkai Building Materials Co., Ltd.
With 18 years in cold-formed steel design and a BS in Civil Engineering, Daniel has personally managed over 300 export container shipments of light gauge metal joists, drywall steel profiles, and ceiling systems.
π© Direct contact: brankwong@126.com | π¬ WhatsApp: +86 139 1056 6706
Here are actual WhatsApp and email conversations between our export team and buyers (screen captures with consent).

Privacy protected β client names and logos removed.
Get a factory-direct quote within 24 hours. We'll send you spec sheets, a load span calculator, and a sample box for pre-production approval. First-time orders include free container loading optimization.