Hit enter to search or ESC to close
Wen'an Jinkai Building Materials Co., Ltd.
Cut procurement costs by up to 32% while ensuring ASTM/EN-compliant drywall framing and suspended ceiling performance. Direct supply from our Hebei, China factory with lead times as short as 15 days for standard profiles.
β ISO 9001:2008 Certified | High-Tech Enterprise (2019) | 13 Utility Model Patents
Our black iron studs and 650 drywall grid system combine the structural reliability of cold-formed steel framing with the clean aesthetics of an exposed black ceiling suspension system. As a factory that has grown from a regional supplier to an exporter serving the Middle East, Southeast Asia, Australia and beyond, we engineer every profile for dimensional precision and long-term durability.
The term black iron for metal studs refers to the corrosion-resistant black oxide or matte powder-coated finish applied to our cold-rolled galvanized steel profiles. This finish is increasingly specified in retail, hospitality and industrial interiors for its distinctive visual contrast and its ability to meet stringent fire-rating requirements.
The 650 grid ceiling module β with main runners spaced at 650 mm and cross tees at 650 mm intervals β offers a robust intermediate grid size that balances panel weight, lighting integration and seismic stability for commercial projects.
π Request Technical Data Sheet
Our roll-forming production line in Hebei, China
Five structural problems corporate buyers face when sourcing steel framing and grid systems through traditional channels:
Trading companies and regional distributors typically add 25β40% to the ex-works price of steel ceiling components. A factory-direct buyer eliminates these layers entirely.
The NACE (now AMPP) study on coastal environments notes that standard G40 galvanization fails within 5 km of seawater. Many importers unknowingly receive sub-standard zinc coatings, leading to rust bleed and board staining.
The NIST forensic study on T-bar grid load failure found that most collapses originate from cross tee disengagement, not steel tensile failure. A slight twist in the tab connection can cut load capacity by 50%. Low-quality grids with fragile tabs are a liability.
Poorly planned packaging and non-optimized profile lengths increase CBM (cubic meter) charges by 20β35%. Buyers often pay container freight for empty space.
The World Steel Association's trade analysis shows that tariff disputes directly shift steel sourcing patterns. US buyers affected by Section 232 tariffs on galvanized coil need suppliers who can flexibly source from alternative mills or provide documentation for tariff code classification.
Most trading companies impose 3β5 ton MOQs. Our factory offers low-volume trials at 1 ton or less for new customers, enabling you to validate quality before committing.
If your projects demand consistent quality, certified compliance and supply-chain transparency, our vertically integrated factory is built to deliver on all three fronts.
As a high-tech enterprise recognized by the Hebei provincial government, we own the entire roll-forming, cutting, punching and coating operation. Our export team responds directly to your technical queries, not via a sales agent.
Need custom web widths (65 mm, 90 mm, 150 mm), special perforation patterns, or a particular RAL black coating? We produce profiles to your exact drawings. 1 national invention patent and 13 utility model patents protect our manufacturing methods.
With an annual output value exceeding RMB 160 million, our production lines run 24/7. We ship standard container orders in 15β20 days, OEM orders in 30β35 days. Pre-packing optimization reduces your sea freight CBM measurement by up to 16%.
The following tables summarize the key dimensional parameters, material properties and load performance data for our black iron metal studs and 650 drywall grid components. All values are measured in accordance with ASTM C645 / C955, EN 14195, or GB/T 11981 as applicable.
| Parameter | Available Range | Standard Compliance |
|---|---|---|
| Steel Grade | Q195, Q235, DX51D+Z, SGCC | ASTM A653 / EN 10346 |
| Web Width (Stud) | 50 mm, 65 mm, 75 mm, 100 mm, 150 mm | ASTM C955 / EN 14195 |
| Flange Height | 25 mm, 30 mm, 35 mm, 40 mm | Custom per OEM drawing |
| Base Steel Thickness | 0.40 β 1.00 mm (tolerance Β±0.02 mm) | ASTM C645 minimum: 0.35 mm |
| Section Length | 2400 / 2700 / 3000 mm or cut-to-length | Custom lengths available |
| Surface Finish | Black iron (powder coated RAL 9005), Galvanized G30βG90, Pre-painted | ASTM B117 / ISO 9227 salt spray tested |
| Zinc Coating Weight | 30 β 275 g/mΒ² (G90 = 275 g/mΒ²) | ASTM A653 / EN 10346 |
| Perforation Options | Web slots with 15% open area for acoustic decoupling & thermal break | Optimized per ScienceDirect fire & acoustic data |
| Parameter | Value | Remarks |
|---|---|---|
| Module Size | 650 mm Γ 650 mm | Standard; custom modules available on request |
| Main Runner Profile | Black Iron T15, T24 (Flat or Ultra-Line) | 24 mm face width for exposed grids, 15 mm for concealed |
| Cross Tee Profile | T15 / T24 matching main runner | FUT-style connection engineered per NIST recommendations |
| Steel Thickness (Grid) | 0.30 mm β 0.40 mm hot-dipped galvanized | Zinc weight: 60β120 g/mΒ² |
| Load Capacity | Up to 1.2 kN per hanger at 650 mm spacing | Validated via 3rd-party deflection testing |
| Connection System | FUT-style snap-lock / twist-lock | Reduces installation error vs. flat tab systems |
| Surface Finish | Black iron electrostatic polyester powder coating | 150 Β΅m thickness, salt spray tested β₯ 500 h |
| Fire Performance | A2-s1,d0 (EN 13501-1) non-combustible | Steel profiles do not contribute to fire load |
Different global markets have evolved distinct framing and ceiling standards. Our factory produces profiles for each of the major regional systems:
We manufacture C-studs and U-tracks to ASTM C645/C955, compatible with 24" or 16" OC spacing. Deeper tracks (UD-150) available for staggered double-stud acoustic partitions. Per the AWCI analysis, resilient channels with engineered corrugation patterns are available as separate furring elements, boosting STC ratings of partition assemblies.
South American projects often require G90 galvanized coating due to humidity. Our South American System profiles prioritize axial load bearing for concrete-encased structures, with stud/track combinations engineered for muro seco construction. We also supply Australian System components for projects adapting to seismic requirements.
For projects within 5 km of the sea, the NACE/AMPP guideline requires G90 or stainless steel. Our furring systems for the Middle East use a minimum G90 coating, with optional stainless steel grades, and we weld-point protect all connections to prevent rust initiation.

In 2025, a UAE-based contractor sourced our black iron T15 grid and 65 mm black iron studs for a multi-level retail ceiling and partition project. The shipment of 480 tons was delivered in 3 batches over 6 weeks. Key results:
22% reduction in total material cost vs. previous European supplier
Zero defects reported across all 220,000+ profile units
Installation productivity improved 18% due to consistent Β±0.2 mm tolerances
Achieved project LEED compliance with our A2-s1,d0 fire-rated profiles
A snapshot of how we coordinate technical details, pricing and logistics with buyers around the world.

For standard products, our MOQ is 500 kg for trial orders and 1 ton for ongoing supply. For custom OEM profiles, we can start production at 2 tons. This flexibility allows you to validate quality before scaling up.
Yes. Our production lines are configured to roll-form profiles to EN 14195 for EU markets and ASTM C645/C955 for North American markets. We also produce per JIS and Australian standards. We can provide dimension test certificates from our provincial-level inspection lab.
"Black iron" in our product range refers to a matte black electrostatic powder coating applied over the galvanized surface. It provides both aesthetics and an additional protective layer. The zinc layer underneath still meets G30βG90 requirements, and the full system passes 500+ hours of salt spray testing per ISO 9227.
Our export team optimizes every container through CAD-based palletization. We choose the most efficient packing orientation to maximize weight-to-CBM ratio, lowering your per-unit sea freight cost by 10β16% compared to loosely packed shipments. We also work with major forwarding partners to offer FOB, CIF and DDP terms.
Absolutely. We hold 1 invention patent, 13 utility model patents and have extensive OEM experience. Send us your drawing or even a rough sketch β our engineers will review feasibility, provide tooling recommendations, and deliver PPAP-level sample parts for your approval.
Every order includes a 12-month warranty against material or manufacturing defects. Our technical team provides installation guidance, load calculation support and troubleshooting via email or WhatsApp. We also maintain traceability records for every production batch for quality audits.
We accept T/T (30% deposit, 70% against B/L copy), L/C at sight, and for orders above $20,000, we can discuss D/P or CAD terms. Incoterms supported: EXW, FOB Tianjin/Xingang, CIF, CFR, and DDP for select destinations.
Yes. We provide free samples for standard profiles, with the buyer covering express shipping. For custom OEM parts, sample tooling costs may be deducted from your first bulk order. Contact us at brankwong@126.com to request samples.
Unedited supplier evaluations that reflect our actual performance on projects, not scripted marketing content.
"Dealing with Jinkai has been refreshing. I sent them a Saudi Aramco compliance spec, and their engineering team responded within 48 hours with a full material certification pack. The 650 grid ceiling system they supplied was the most consistent batch we have ever received from overseas."

Project Manager, Riyadh, KSA
"We use their black iron studs in loft conversions across the UK. The consistent black finish is aesthetically critical for us. Previously we had to ask distributors to re-paint standard galvanized studs at a huge cost. Jinkai's baked-on powder coat solution saves us Β£2.10 per linear meter."

Architectural Specification Lead, London, UK
"I've sourced drywall profiles from four different Chinese factories over 8 years. Jinkai is the only one that hasn't missed a shipment date. Their production planning team actually calls you when there's a potential port congestion issue and arranges alternative routes. Solid partner."

Supply Chain Director, Auckland, NZ

Senior Technical Export Manager
With 14 years of hands-on experience in cold-formed steel framing and ceiling grid systems across the Middle East, Southeast Asia and Western markets, I have personally managed over 1,400 export shipments and led the technical approval processes with international contractors and distributors. My goal is to help procurement teams make data-backed decisions about steel framing quality, coating durability and supply chain pricing.
π§ brankwong@126.com | π +86 13910566706
Request a quote before May 30, 2026 and receive free sea freight costing on your first container. Our quotes include full technical documentation, packing lists and compliance certificates.
β Free samples available β 12-month warranty β No MOQ for standard trial orders
Or email us directly at brankwong@126.com
Office: Dongdu Industrial Park, Huangfu Farm, Langfang, Hebei, China | www.jinkaibm.com
Since our founding, we have grown from a regional factory to a recognized supplier for contractors and distributors in the Middle East, Malaysia, Indonesia, the Philippines, Australia, and beyond.
π³ Certifications & Audits
π¬ What Our Buyers Say
Procurement Manager, Dubai, UAE
"We switched 80% of our ceiling grid purchases to Jinkai in 2025. Their black iron 650 grid is dimensionally spot-on, and the snap-fit connection cut our installation time by 15%. Material cost savings exceeded 20% compared to our previous supplier."
Technical Director, Berlin, Germany
"The factory's willingness to produce custom-length black iron studs for our modular housing project was exceptional. Lead time was 28 days, and the galvanizing quality passed our salt spray tests easily. The engineering team speaks fluent technical English."
Operations Director, Sydney, Australia
"Jinkai's Australian drywall system profiles meet our strict seismic requirements. The consistency of their roll-forming process means fewer rejected pieces at the installation site β our reject rate dropped from 3.5% to under 0.4%."