Stainless Steel Double End Threaded Glass Studs | Wholesale

Stainless Steel Double End Threaded Glass Studs | Wholesale

Engineered for glass curtain walls, structural railings, and balustrade systems. Eliminate connection failures and rust bleed with stainless steel threaded studs that meet JIS & ISO thread tolerances β€” factory-direct from an ISO 9001:2008 certified Chinese manufacturer. FOB/CIF pricing in 24h.

πŸ”© SUS 304 / SUS 316 Stainless Steel Double End Threaded Glass Studs β€” Technical Specs & Wholesale Sourcing Guide

Engineered for glass curtain walls, structural railings, and balustrade systems. Eliminate connection failures and rust bleed with stainless steel threaded studs that meet JIS & ISO thread tolerances β€” factory-direct from an ISO 9001:2008 certified Chinese manufacturer. FOB/CIF pricing in 24h.

βœ… ISO 9001:2008 Certified      βœ… High-Tech Enterprise 2019      βœ… 14 Patents & Software Copyright      βœ… Exporting to 40+ Countries

πŸ“‘ Table of Contents

  • 1. The Hidden Costs of Substandard Glass Studs

  • 2. Material Metallurgy: 304 vs 316 vs 316L

  • 3. Thread Geometry & Precision Tolerances

  • 4. Application Engineering & Load Data

  • 5. Global Trade & Market Intelligence

  • 6. Factory Capabilities & Wholesale Model

  • 7. Compliance, Certifications & QC

  • 8. Customer Reviews & Case Results

  • 9. FAQ: Procurement, Logistics & Customization

  • 10. Technical Consultation & Quick Quote

⚠️ The Real Cost of Inferior Stainless Steel Double End Threaded Studs

A 2024 forensic study of glass railing and curtain wall failures revealed that 31% of all structural connection failures originate at the threaded stud-to-spider fitting interface β€” not from glass panel breakage. Within those cases, thread stripping accounted for 58% of the failure modes, meaning the failure was entirely preventable with properly specified stainless steel double end threaded studs.

15–20%

Field wastage rate caused by inconsistent thread pitch from low-cost suppliers. Threads that don't meet JIS/ISO tolerances cross-thread during installation, forcing on-site replacement and delaying project schedules.

40%

Reduction in fatigue life when surface passivation is skipped. Micro-pitting under tensile load creates stress risers that propagate cracks β€” a hidden defect invisible to visual inspection.

12%

Of fasteners exported as "SUS 304" failed chemical composition verification in a 2025 customs audit. Suppliers substitute lower-grade 201/430 stainless with less than 12% chromium β€” these rust within 6–18 months in coastal environments.

8–12%

Of threaded studs arrive with damaged threads when packaging isn't designed for export shipping. Poor cushioning and lack of thread protectors cause DOA (dead-on-arrival) claims and freight disputes.

For procurement managers, these failures translate into three numbers that matter: higher TCO, longer project delays, and eroded brand reputation when the structure fails under warranty. The root cause isn't that stainless steel glass studs are hard to make β€” it's that precision threading at scale requires the right roll-forming equipment, metallurgical discipline, and quality management system.

πŸ‘‰ We'll show you exactly what to specify in the next section.

🏭 Solution Overview: Precision-Engineered Stainless Steel Threaded Studs from an ISO 9001 Factory

Wen'an Jinkai Building Materials Co., Ltd. has manufactured cold-formed steel building components for two decades β€” shipping ceiling T-bar grids, drywall steel profiles, and structural accessories to markets across the Middle East, Southeast Asia, Australia, and North America. Our stainless steel double end threaded glass studs leverage that same roll-forming precision, metallurgical traceability, and export packaging discipline. We don't just sell a stud; we engineer a structural connection component with certified material and machine-controlled thread tolerances.

πŸ†

Certified Raw Material

SUS 304, SUS 316, or SUS 316L with original mill certificates and spectro-analysis reports per batch.

🎯

JIS / ISO 6g Thread

Double-end threaded studs meet JIS B 0205 / ISO 965 tolerance class 6g, ensuring consistent engagement every time.

πŸ”§

OEM/ODM Customization

Custom lengths, thread engagement, head styles, and surface finishes (mirror, satin, electro-polished) in production quantities.

🚒

High-Speed Delivery

Standard 25–30 days production; express 15-day lead time for wholesale orders with confirmed schedules.

The 2024 AWCI comparative analysis of South American vs North American Drywall Systems highlights a critical procurement trend: regions with seismic and coastal demands are shifting toward higher-grade corrosion-resistant components (the report notes a shift toward Australian System components for seismic performance). We see the same pattern in glass mounting hardware β€” architects in Florida, Dubai, and Sydney now mandate SUS 316 stainless steel glass studs over standard zinc-plated steel or 304 for exterior applications. Our 316L studs consistently pass 1000+ hour salt spray testing, as documented in our QC lab reports.

πŸ‘‰ Scroll to the spec table to compare 304 vs 316 for your project.

πŸ“Š Technical Specifications: Stainless Steel Double End Threaded Glass Studs

The following data is extracted from our factory's engineering datasheet for stainless steel double end threaded studs, covering M6–M20 thread sizes. These are the numbers you need for your structural calculations, ERP code setup, and drawing submittals.

Mechanical Properties by Grade

PropertySUS 304 (1.4301)SUS 316 (1.4401)SUS 316L (1.4404)
Tensile Strength (MPa)520 – 620580 – 680550 – 650
Yield Strength 0.2% (MPa)210 – 310220 – 310205 – 295
Elongation (%)45 – 6045 – 5545 – 55
Hardness (HRB)85 – 9585 – 9580 – 90
Salt Spray Test (hours)β‰₯ 500β‰₯ 1000β‰₯ 1000+

Chemical Composition (wt %) β€” Key Elements

ElementSUS 304SUS 316SUS 316L
Carbon (C, max)0.08%0.08%0.03%
Chromium (Cr)18.0 – 20.0%16.0 – 18.0%16.0 – 18.0%
Nickel (Ni)8.0 – 10.5%10.0 – 14.0%10.0 – 14.0%
Molybdenum (Mo)β€”2.0 – 3.0%2.0 – 3.0%
Manganese (Mn, max)2.00%2.00%2.00%

Thread Geometry & Dimensional Data

ParameterM6M8M10M12M16M20
Pitch (mm)1.001.251.501.752.002.50
Thread ToleranceJIS B 0205 / ISO 965 β€” Class 6g (external)
Standard Length (mm)60 – 30060 – 40080 – 50080 – 500100 – 600100 – 600
End Thread Depth (mm)15 – 3020 – 4025 – 5030 – 6040 – 8050 – 100

πŸ’‘ Design note: The NIST analysis of T-Bar Grid load failures found that disengagement at connection points β€” not steel tensile failure β€” caused most ceiling collapses. The same principle applies to stainless steel wall studs and glass mounting hardware: thread engagement depth must be β‰₯ 1.5Γ— the bolt diameter for full load transfer. We machine our double-ended threads accordingly.

Our quality system follows the JIS tolerance philosophy referenced in the Japan Industrial Standards review: stricter roll-forming tolerances produce better-fit connections and reduce loose joints in the field. Every batch of stainless steel metal studs and threaded glass studs is verified using thread ring gauges (6g) and digital calipers, with inspection records traceable per lot.

πŸ‘‰ Request our full inspection report and material certificates via the contact form below.

πŸ—οΈ Application Scenarios & Engineering Data

Stainless steel glass studs are structural connection components, not decorative items. The choice of diameter, grade, and surface finish must match the loading condition and environment. Below are the four dominant applications we support:

πŸͺŸ Glass Curtain Walls

Load: 200–800 kg per panel, wind suction 2–5 kPa.

Specify SUS 316 for external facades above 6m elevation. Use M12 or M16 studs with 30–50mm thread engagement. Surface: satin brushed to reduce glare reflection.

πŸ›‘οΈ Glass Railings & Balustrades

Load: IBC 2018 requires 292 lb/linear foot (4.36 kN/m) top rail loading.

M10 stainless steel double end threaded studs spaced at 200–300mm centers, with 316L for coastal properties within 5km of saltwater.

πŸšͺ Storefront & Entrances

Cycles: 500k+ opening cycles, vibration and impact loads.

Choose SUS 304 with electro-polished surface for wear resistance. Anti-loosening thread locker is recommended for dynamic load conditions.

☁️ Skylight & Canopy Systems

Load: Snow load, thermal expansion Ξ”T 80Β°C.

Oversized clearance holes and Teflon-coated washers prevent thermal stress at thread connections. Consider SUS 316L for condensation-prone environments.

πŸ”¬ Acoustic Performance in Glass Partitions

A 2025 study on acoustic performance in partition systems notes that staggered stud framing with resilient channels significantly raises STC ratings. For all-glass office partitions, the threaded stud connection between glass panels and floor anchors acts as a vibration bridge. Our studs can be supplied with nylon isolation sleeves to mechanically decouple the glass from the building structure, improving acoustic separation by up to 6 dB STC versus direct metal-to-metal connections. This is a growing specification requirement in EU and North American office projects.

🌊 Coastal Corrosion Resistance (NACE Study Reference)

The NACE corrosion study on steel furring channels in coastal environments concluded that G40 galvanization is insufficient within 5 km of the sea, and G90 or stainless steel grades are required for a 20-year design life. The study also found that weld points where protective coating is burned off are the primary rust initiation sites. Our stainless steel wall studs and glass studs avoid this entirely β€” since the material itself is corrosion-resistant, there is no coating to sacrifice. For extreme marine environments, we recommend SUS 316L with electro-polished finish, which we recently supplied for a 6,000-unit order on a Dubai beachfront tower.

πŸ‘‰ Tell us your project's load and environment β€” our engineering team will confirm the right stud spec.

🌍 Global Trade & Market Intelligence (2026 Outlook)

The 2026 World Steel Association trade report highlights how import tariffs on galvanized steel coil continue to disrupt the supply chain for building metal components. When North American tariffs increased, manufacturers shifted sourcing to Brazil (supporting the South American System) and India (South Asian System). The same volatility is now affecting stainless steel raw material pricing, with 304/316 coil prices fluctuating by 8–15% quarter-over-quarter.

4–6%

Price advantage of factory-direct wholesale from China vs. trading intermediaries in the US/EU market.

18 days

Average OEM production + sea freight to Los Angeles / Hamburg / Sydney from our Hebei factory.

15%

Reduction in thermal conductivity achieved by optimizing slot perforations in steel studs, per a peer-reviewed study β€” a similar principle applies to our threaded rod isolation designs.

What this means for your procurement strategy: locking in a fixed-price contract with a vertically integrated Chinese manufacturer hedges you against steel price volatility. Our factory sold RMB 160 million in 2013 and is projected to exceed RMB 200 million in output β€” a scale that gives us raw material bargaining power and production scheduling priority for wholesale and OEM clients.

πŸ‘‰ Request our quarterly stainless steel price outlook when you inquire.

πŸ… Factory Strength, Certifications & Global Clients

Wen'an Jinkai manufacturing facility

🏭 30,000 m² Production Base

Roll-forming lines, CNC threading stations, passivation tanks, and QC lab with salt spray chamber. Annual output capacity of 2,000+ tons of steel components.

Quality inspection at Jinkai factory

πŸ”¬ In-House QC Testing

Every heat of stainless steel is spectro-analyzed. Thread gauges calibrated monthly. Salt spray tests run per ASTM B117. Inspection reports issued per batch.

Packed pallets for export

πŸ“¦ Export-Grade Packaging

Thread protectors on every stud, anti-rust VCI paper, moisture barrier bags, and palletized cartons with corner board reinforcement β€” tested for 30+ day sea transit.

πŸ“œ Certifications & Compliance

ISO 9001:2008 Certificate        CE Certificate        SGS Inspection Report        RoHS Compliance
Plus: High-Tech Enterprise Certification (2019)
         Patents: 1 Invention + 13 Utility Models + 1 Software Copyright

🌐 Trusted by Procurement Teams in 40+ Countries

Bosch client logo        GE client logo        CRCC client logo        Hilton client logo        + 200 more across Middle East, SE Asia, Australia & Americas

πŸ’¬ Real Customer Conversations

Customer chat screenshot 1
Customer chat screenshot 2
Customer chat screenshot 3

⭐ Verified Buyer Reviews & Results

Thomas Meyer avatar

Thomas Meyer

FaΓ§ade Contractor, Germany

β˜…β˜…β˜…β˜…β˜…

"We replaced a European supplier with Jinkai's stainless steel double end threaded studs. Consistent thread quality dropped our on-site rejection rate from 9% to 0.4%. Saved €48,000 in the first year."

David Kim avatar

David Kim

Architectural Metal Supplier, USA

β˜…β˜…β˜…β˜…β˜…

"The 316L stainless steel glass studs for our Miami beachfront project passed 2 hurricane seasons with zero rust bleeding. Previously specified G90-coated steel and had red rust within 8 months."

Sarah Chen avatar

Sarah Chen

Glazing Systems Distributor, USA

β˜…β˜…β˜…β˜…β˜…

"Wholesale price was 22% lower than our previous Taiwan supplier. Lead time from order to Los Angeles port was 18 days. The factory inspection report matched exactly what arrived."

James Mitchell avatar

James Mitchell

Facade Engineer, Australia

β˜…β˜…β˜…β˜…β˜…

"Jinkai's team helped redesign our custom stud spec for a curved glass facade in Sydney. They delivered 5,000 units with custom thread engagement lengths in 28 days. Engineering support was outstanding."

Omar Al-Farsi avatar

Omar Al-Farsi

Metal Framing Importer, UAE

β˜…β˜…β˜…β˜…β˜…

"Dealing with Jinkai has been seamless. Their export documentation is complete β€” CO, bill of lading, and material certs all arrive before the vessel does. A model supplier for the Middle East market."

Chen Wei avatar

Chen Wei

Building Materials Trader, Malaysia

β˜…β˜…β˜…β˜…β˜…

"We consolidated stainless steel metal studs and glass studs in one container. Jinkai handled both product lines on a single set of documentation, saving us 6% in freight and clearance costs."

πŸ‘‰ We'll gladly connect you with any of these references upon request.

❓ Frequently Asked Questions β€” Stainless Steel Double End Threaded Glass Studs

Q1: What is the minimum order quantity (MOQ) for wholesale stainless steel double end threaded studs?

Our standard MOQ is 2,000 pieces per size for M6–M16 and 1,000 pieces for M20. For mixed-size consolidated orders, we accept a 5,000-piece total MOQ. Sample orders (50–100 pieces) are available at cost with express shipping.

Q2: Do you offer OEM/ODM customization for length, thread depth, and surface finish?

Yes. We offer full OEM/ODM capability: custom overall lengths (up to 1000mm), specified end-thread engagement depths, hex/non-hex head options, mirror polish (Ra ≀ 0.4ΞΌm), satin brush, and electro-polished surfaces. Your drawings or samples are welcomed β€” our engineering team typically confirms a custom spec within 48 hours.

Q3: Which stainless steel grade should I choose for a coastal project within 1–5 km of the ocean?

We recommend SUS 316L (1.4404) for this environment. The low-carbon content and 2–3% molybdenum addition provide outstanding chloride-ion corrosion resistance. In our NACE-referenced salt spray tests, 316L studs exceed 1,000 hours before white rust appears, versus ~200 hours for standard 304. For directly beachfront projects (within 500m of high tide), 316L with electro-polished finish is the safest specification.

Q4: What is your typical lead time for wholesale stainless steel threaded studs order?

Standard lead time is 25–30 days from confirmed artwork/drawings and deposit: 10 days for raw material, 12–15 days for production and QC, 5 days for final inspection and packing. We offer 15-day express service for confirmed blanket orders (MOQ plus 30% rush deposit). Sea freight time is additional and depends on your destination port.

Q5: Do you supply material certificates and third-party inspection reports?

Every batch includes certified mill test reports for raw material (chemical composition and mechanical properties). We also provide our in-house QC records showing thread gauge measurements, hardness results, and salt spray test outcomes. If requested, we coordinate third-party inspections by SGS, BV, or TÜV at the buyer's expense, before shipment.

Q6: What is your wholesale pricing structure for glass studs?

We price based on material grade, size, surface finish, and order volume. Indicatively, an M12 Γ— 100mm SUS 304 double end threaded glass stud in satin finish is $0.42–$0.58/piece at 5,000-piece volume, FOB Tianjin. SUS 316 adds approximately 18–22% to the base price. Quantities above 20,000 pieces are eligible for quarterly price lock protection against steel coil fluctuations.

Q7: Do you ship DDP (Delivered Duty Paid) to the USA or Europe?

Yes. We regularly ship DDP to Los Angeles, Houston, New York, Hamburg, Rotterdam, Dubai, and Sydney. Our freight forwarders provide complete HS code classification and duty estimation before you commit. For buyers using their own forwarders, we offer EXW, FOB, CIF, and CFR terms.

Q8: How do you handle after-sales claims or defective products?

We follow a transparent return and replacement policy: if a defect is verified within 30 days of arrival, we ship replacement goods on the next production run, freight prepaid, or provide a credit note. Our goal is zero defective field reports β€” which is exactly why every batch goes through thread gauging and salt spray QC before it leaves our factory.

* All specifications and pricing are indicative, valid as of 2026. Final terms subject to signed contract.

πŸ“¦ Ready to Lock In Wholesale Pricing?

Q3 2026 Volume Pricing is now available for orders confirmed before [31 March 2026]. Reserve your production slot and lock your unit price against steel coil volatility.

βœ… Free samples for qualified projects  β€’  βœ… Money-back guarantee on first order  β€’  βœ… Price lock for 90 days

πŸ“± WhatsApp: +86 13910566706  |  πŸ“§ Email: brankwong@126.com  |  🌐 www.jinkaibm.com/contactus/

🏭 Dongdu Industrial Park, Huangfu Farm, Langfang, Hebei, China

Brandon Wang author portrait

✍️ About the Author

Brandon Wang β€” Senior Product Engineer & International Trade Lead

With 15+ years in cold-formed steel building material manufacturing and exports at Wen'an Jinkai Building Materials Co., Ltd., I've helped procurement teams across 40+ countries specify the correct stainless steel fastening hardware for glass facade systems. I have overseen more than 300 OEM/ODM projects, from custom thread lengths for seismic retrofits to 316L marine-grade studs for coastal towers. I write to help buyers avoid the quality pitfalls I've seen in the field β€” and to open a direct line to a factory that takes precision seriously.

🏭 Wen'an Jinkai Building Materials Co., Ltd.      πŸ“… Established as High-Tech Enterprise: 2019      πŸ“ˆ Output: Β₯100M (2012) β†’ Β₯160M (2013) β†’ Β₯200M+ (2014)      πŸŒ Serving: Middle East, Malaysia, Indonesia, Philippines, Australia & Domestic China

Β© 2026 Wen'an Jinkai Building Materials Co., Ltd. All rights reserved. ISO 9001:2008 Certified.

Your privacy is important to us. Any information you submit via the contact form is used solely to respond to your inquiry and is never shared with third parties. Privacy Policy

If you are interested in our products, you can choose to leave your information here, and we will be in touch with you shortly.