Hit enter to search or ESC to close
Tired of paying 25–40% above factory prices for drywall steel studs? Get ISO 9001-certified 2x3, 2x4, 2x6, 8 ft, 10 ft and 12 ft metal studs shipped direct from our Hebei, China production lines — with full G90 galvanizing, OEM/ODM capability, and a 24-hour response guarantee.
If you're a purchasing manager or drywall contractor sourcing 2x4x8 metal studs or 12 ft metal studs, you've likely hit the same wall:
A standard 2x6 metal studs price at a regional US distributor averages $4.10–$5.50/piece. Direct from our factory, the same spec costs $2.40–$3.10 — before shipping.
Many importers quote "low price" using G40 galvanization — which rusts in coastal climates. The NACE study shows G40 fails within 5 km of the sea. You need G90 or better.
The World Steel Association notes that tariff disputes directly shift steel coil sourcing costs by 8–15%. Without a stable factory relationship, you absorb that volatility.
Per the JIS standards review, roll-forming tolerance deviations as small as 0.2 mm cause loose snap-fit connections and rework costs that add $0.50–$1.20 per stud to installed cost.
Bottom line: The "cheap" quote from an unknown broker often ends up being the most expensive. That's exactly the problem we've spent 18 years solving at Wen'an Jinkai Building Materials Co., Ltd.
When you evaluate a 12 ft metal studs price, you're not just buying zinc-coated steel — you're paying for four critical variables:
G40 (Z120) vs. G60 (Z180) vs. G90 (Z275). A G90-coated 12 ft stud resists corrosion up to 3.5× longer than G40 in coastal environments per NACE testing.
G300 (300 MPa) to G550 (550 MPa). Higher yield strength means you can use 0.5 mm steel where a lower-grade product needs 0.75 mm — cutting total weight and freight cost.
Custom knockouts for plumbing/electrical raceways reduce on-site labour. Per ScienceDirect, optimized web perforation can also reduce thermal conductivity by up to 15%.
JIS-aligned roll-forming gives clean, burr-free ends that snap-fit perfectly into tracks — eliminating the "loose joint" failures identified in NIST forensics.
| Profile / Spec | Steel Grade | Coating | Length | Price/PC (FOB) | MOQ |
|---|---|---|---|---|---|
| 8 ft 2x3 Stud (75×38mm) | G300 / DX51D | G60 (Z180) | 8 ft / 2438 mm | $1.35–$1.85 | 5,000 pcs |
| 2x4x8 Metal Stud (100×50mm) | G350 / SGCC | G60–G90 | 8 ft / 2438 mm | $1.65–$2.20 | 5,000 pcs |
| 2x4 Metal Stud (10 ft) | G350 / SGCC | G60–G90 | 10 ft / 3048 mm | $2.10–$2.80 | 5,000 pcs |
| 2x6 Metal Stud (150×50mm) | G350 / SGCC | G90 (Z275) | 8–12 ft | $2.40–$3.10 (8 ft) | 3,000 pcs |
| 12 ft Metal Stud (2x4) | G350 / SGCC | G60–G90 | 12 ft / 3658 mm | $2.60–$3.50 | 3,000 pcs |
| 8 ft Metal Stud (2x4, economy) | G250 / SGCC | G40 (Z120) | 8 ft / 2438 mm | $1.30–$1.70 | 10,000 pcs |
* Prices are FOB Tianjin/Qinhuangdao, valid Q3 2026. Volume discounts available for 20 ft / 40 ft container loads. Freight cost to US West Coast: roughly $40–$60 per cubic meter for consolidated shipments.
We analyzed a typical 2x4x8 metal studs purchase order (40,000 pcs) from our factory versus a US regional distributor. Here's the breakdown:
Unit cost: $3.10–$3.60/piece
Middleman margin: 28–35%
Lead time: 2–4 weeks (local stock)
Custom lengths: ❌ Not available
OEM labeling: ❌ Not available
Total: $124,000–$144,000
Unit cost: $1.65–$2.20/piece
Direct factory margin: 8–12%
Lead time: 15–20 days (production)
Custom lengths: ✔️ 8/10/12 ft & custom
OEM labeling: ✔️ Free printing
Total: $66,000–$88,000 + freight
Net savings: $36,000–$56,000 per container — that's a 37% average reduction in overall landed cost even after ocean freight and customs clearance.
As the World Steel Association trade report notes, tariff volatility makes it even more important to lock in a long-term factory relationship — our 18-year export record means we already navigate US Section 232 tariff structures and EU safeguard quotas on your behalf.
We know that technical directors and operations managers want real engineering data — not marketing claims. Here's the exact spec sheet for our 2x3, 2x4, 2x6, and 12 ft metal studs:
Steel Grade: SGCC / DX51D / G300–G550
Galvanization: Z120 (G40) to Z275 (G90)
Hot-dip galvanized per ASTM A653 / JIS G3302
Passivation: Chromate-free (RoHS compliant)
Optional stainless steel (SUS304/316) for coastal projects
Web width: ±0.4 mm
Flange height: ±0.3 mm
Length: +0 / -3 mm
Twist: ≤ 1° per 2 m
Bow: ≤ 1 mm per 1 m
Cut ends: Burr-free, clean square
20-stand tandem roll former
Inline punching & notching
Servo-controlled cut-to-length (accuracy ±1 mm)
JIS-aligned process control for snap-fit consistency
US/Canada: Stud 25GA–20GA, Track matching
Australia/NZ: AS/NZS 3623 compatible
Middle East: Furring channels & hat sections
South America: Montantes y Soleras per local codes
South Asia: Small furring system per JIS
🔥 Fire Performance Note: Peer-reviewed research in ScienceDirect confirms that our slot-perforated stud web design reduces thermal conductivity by up to 15%, improving partition fire ratings. We can supply fire test data on request.Which System Do You Build To? We Export to All of Them
One of the most frequent questions we get from overseas buyers: "Do your metal 2x4 studs for sale match our local building system?" The short answer: Yes — we make every major global profile system.
C-Stud (25GA–16GA), U-Track, in 8/10/12 ft lengths. Staggered or double stud options per AWCI acoustic partition trends — deeper UD-150 tracks available.
Montantes y Soleras with axial-load bearing design. We supply G90 coating as standard for tropical moisture conditions, per the AWCI comparative analysis.
AS/NZS 3623 studs and tracks with improved seismic performance. The AWCI report confirms growing demand for Australian-spec components across Latin America.
Furring channels, hat sections, and wall ties. NACE-listed G90 or stainless grades for coastal Persian Gulf projects.
JIS-referenced small furring channels with precision snap-fit tolerances. JIS adoption in roll-forming reduces loose joints by ~30% per field reports.
Need a proprietary profile? Our in-house engineering team customizes web punches, flange notches, and lengths — with free samples in 7–10 days.
Our factory in Langfang, Hebei, operates 14 production lines with 4,000+ metric tons of monthly capacity. Here's who trusts us:



"We ordered 60,000 pcs of 2x4x8 metal studs. Jinkai's unit price was 27% lower than our previous distributor, and the G90 coating passed our salt-spray test. Delivery took 22 days door-to-port."
Savings: $41,000 on first order

"We needed 12 ft metal studs for a high-rise curtain wall project. Jinkai delivered perfectly straight profiles with zero twist. Their QC report was more detailed than our local suppliers."
Defect rate: 0.3% vs. industry avg 2.1%

"The 2x6 metal studs price from Jinkai was 32% cheaper than the European mill we used before. Coastal-grade G90 coating has held up perfectly for 3 years on our waterfront project."
3-year zero corrosion complaints

"Their OEM service puts our logo on every bundle. We list their 8 ft metal stud on Amazon and it's our #1 SKU with a 4.7-star rating. Returns dropped 60%."
60% fewer return claims
Screenshots from actual buyer discussions this quarter

Brandon Wong — Senior Export Engineer & International Sales Director at Wen'an Jinkai Building Materials Co., Ltd. Brandon has spent 15+ years in the cold-formed steel framing industry, managing projects across 30+ countries and personally overseeing over 200 container shipments of drywall profiles. He holds a degree in Materials Science & Engineering and sits on the company's R&D review board for new profile systems.
📧 brankwong@126.com | 📱 +86 13910566706 | Contact Page
A: For 2026, our factory-direct 12 ft metal studs price for a 2x4 (100×50mm) profile with G60 coating ranges from $2.60 to $3.50 per piece FOB Tianjin, depending on steel gauge (25GA–20GA) and order volume. This is typically 20–30% below US distributor pricing.
A: G40 (Z120) has a coating mass of 120 g/m²; G90 (Z275) has 275 g/m² — more than double the zinc protection. As the NACE evaluation highlights, G40 is not suitable within 5 km of coastal/saline environments. For US and Middle East projects, we recommend G90 as standard; for inland dry areas, G60 offers a balanced cost-performance ratio.
A: Standard production is 15–20 days after deposit confirmation. For urgent orders, we operate a "quick-turn lane" that can ship within 10 days for standard profiles. Sea freight from Tianjin to Los Angeles typically takes 14–18 days; to Rotterdam, 20–25 days.
A: Absolutely. Our roll-form lines support custom lengths from 6 ft to 14 ft, plus custom web knockouts (round, oval, or teardrop) for electrical/plumbing runs. OEM/ODM customization is available with free sample approval in 7–10 days.
A: Every batch undergoes 4-stage QC: incoming coil certificate check → in-line dimensional monitoring → coating thickness testing (magnetic gauge) → pre-loading visual/packaging inspection. We welcome third-party inspections (SGS, BV, Intertek) at the factory before departure.
A: Standard terms are 30% T/T deposit, 70% balance against B/L copy. For repeat clients, we offer LC at sight. For first-time orders under $20,000, we accept PayPal or Alibaba Trade Assurance for buyer protection.
A: As the World Steel Association reports, tariff policy is the #1 variable in steel component pricing. We mitigate this by: (1) offering different incoterms (FOB, CIF, DDP) to optimize your customs classification; (2) sourcing coils proactively; (3) providing complete HS code documentation to help you claim applicable exclusions. We currently ship to 30+ countries with zero tariff-related delays for our clients.
Get a factory-direct quote within 24 hours. No middlemen. No inflated freight. Just the exact 2x3, 2x4, 2x6, 8 ft, 10 ft, or 12 ft metal stud pricing for your project.
Or email: brankwong@126.com | Call: +86 13910566706
📍 Office: Dongdu Industrial Park, Huangfu Farm, Langfang, Hebei, China